A 20% lighter fiberglass mesh-reinforced cement backerboard for residential and commercial tile, stone, slate, and thin-brick applications.

What do you use WonderBoard for?

WonderBoard Lite can be used in applications such as walls, ceilings, floors, decks, countertops and vanities. Use under any tile or natural stone. Not for use over concrete/gypsum substrates. WonderBoard Lite must not be used as a structural load-bearing member.

Is WonderBoard Lite good?

Overall, the 7/16″ WonderBoard® Lite is a much improved cement backerboard for the installation of ceramic and natural stone tile in wet areas. … For larger tiles, with one side greater than 15″, the handbook recommends a medium bed mortar that can range in thickness from 3/16″ – 3/4″.

What is the difference between WonderBoard and cement board?

Unlike other cement backerboards, WonderBoard is not completely stiff. It is flexible, making it a good choice for curved surfaces. WonderBoard is also safer for wet areas than HardieBacker.

What is the best backer board for a shower?

Cement board is a good, reliable backer board that works well on both floors and walls. Keep in mind that most tile setters err on the side of caution and brush a waterproofing membrane on top of cement board when it is in wet areas like showers or tub surrounds.

Is WonderBoard a cement board?

A 20% lighter fiberglass mesh-reinforced cement backerboard for residential and commercial tile, stone, slate, and thin-brick applications.

What is the difference between WonderBoard and durock?

I found that Wonderboard is stiffer than Durock (less floppy) which makes it easier to handle, carrying up stairs, loading etc. It also seemed to have a more consistent cement fill with less voids and less soft and “crumbly” areas than Durock.

Do you need to put backer board under tile?

Whenever you’re laying tile on a wood subfloor, you need to first install cement backer board. Backer board prevents leaks and water damage that could harm your flooring and the structure of your home.

Can you use WonderBoard on the floor?

WonderBoard Lite can be used on horizontal or vertical (7/16″ only) applications such as walls, ceilings, floors, decks, countertops and vanities. Use under any tile or natural stone.

What is similar to Wonderboard?

Types of cement backer board Permabase is National Gypsum’s product and it is very much like WonderBoard from Custom Building Products. Both of these boards are a cement and aggregate core with a fiberglass mesh “skin.” Durock from USG is a slightly lighter weight version of comparable construction methods.

Article first time published on

Is WonderBoard waterproof?

1/2″ WonderBoard is unaffected by water but it is not waterproof. If the area behind the backerboard must be kept dry, a moisture barrier or waterproof membrane such as RedGard® Waterproofing and Crack Prevention Membrane must be used.

What is Wonderboard?

Wonderboard: – a true cement board with a mesh facing for integrity. -brittle. Cut it into thin strips and the strips can easily break. -cutting, score the surface and cut the mesh reinforcement with a handheld carbide cutter and snap, or cut with a diamond blade.

Is WonderBoard Lite waterproof?

WonderBoard® Lite is not a waterproof barrier. If the area behind the backerboard must be kept dry, use RedGard® Waterproofing and Crack Prevention Membrane or Custom® 9240 Waterproofing and Anti-Fracture Membrane Do not use drywall fiberglass tape for this product.

Is WonderBoard fire resistant?

Fire Performance: WonderBoard® has achieved a fire resistance rating for cementitious backer units per ANSI/UL 263 and CAN/ULC S101, Report No. 21766. Flexural Strength ASTM C-947 > 750 psi 900 psi (62.9 kg/cm sq.)

What thickness of backer board should I use?

For flooring, the backer board should be installed over a 5/8-inch thick OSB or plywood base. For countertops, use 3/4-inch plywood beneath the backer board. And for walls and ceilings, apply 1/2-inch or 5/8-inch backer board screwed directly to the wall studs or joists.

Does cement board go over drywall?

Walls: For highly wet areas, such as showers and bathtub surrounds, cement board typically is attached directly over the wall studs, although the studs may be covered with an intervening moisture membrane. … In such wet areas, never install cement board directly over drywall or green board.

Which is better Hardibacker or durock?

HardieBacker is also the go-to choice when it comes to countertops and tile. Durock is too abrasive and can damage vinyl, porcelain, and enamel. HardieBacker does not contain any course materials, so it is the preferable choice. It has a warranty that extends over the use of vinyl tile applications.

Does WonderBoard smell?

This stuff has an incredibly strong, noxious odor.

Which is better green board or cement board?

Cement board will give you better service in a shower. Green board is good for lightly damp places like at the sink. It is not as good as cement board but a heck of a lot better than dry wall.

Can I just screw down cement board?

Screw and Joints Do not use drywall screws as they are not recommended to be used to hold the backer board in place. All of your backer board pieces should be cut before they are placed on​ the floor. … It is important to highlight that screws shall not be installed all the way down to the floor joists.

Do you need to put Thinset under cement board?

Not only is thinset a critical component underneath cement board but the other critical component is the fasteners. And you won’t have the fasteners if you are trying to install it over concrete.

Can cement board be used as subfloor?

1 Answer. No, Hardie cement board is not meant to be structural, and it will not work in place of a subfloor. The board is very strong in compression and very stable so that the tiles applied to it do not crack, but it has very little shear strength.

Can I tile over drywall?

As long as your wall is smooth and flat, you can install a ceramic tile kitchen backsplash directly over drywall or plaster with no problem. Start by cleaning the wall to remove any grease, then apply thin-set adhesive, and set the tile. After the adhesive has set, apply grout, and you’re done.

Can you tile straight onto backer board?

As a building material, interior fibre cement tile backer board products are especially suited as a tiling base for tiling wet areas such as bathrooms, kitchens and showers as it is resistant to permanent water damage and does not need to be treated before tiling.

Can you put tile directly on subfloor?

Tile can be laid on plywood. But do not install tile directly on the plywood subfloor itself. Use an intervening layer of a sheet of thinner plywood.

Can WonderBoard be painted?

Do not paint a cement board unless you have thoroughly cleaned it first, or you may have problems with adhesion. … Unlike standard cement, which is not an ideal surface for paint adhesion, fibrous cement boards contain pores that soak in the adhesives within the paint, making the finish much more durable.

Is cement board and Hardiebacker the same?

Durock and Hardiebacker are two different brands of cement backer boards used in rooms that are susceptible to moisture buildup. While both of these brands offer products that are highly raved about by users, each brand does have their own features that set them apart from each other.

Can you put WonderBoard over drywall?

It should be fine. The wonderboard in this case is just acting as a backerboard for the tile. I wouldn’t put thinset between the sheetrock and cement board.

Do you need RedGard on cement board?

You really don’t need the RedGard, but the more protection the better…so go for it. And yes, you can do the boards beforehand. But, hit the filled seams & screws (your weak points) as soon as a panel is ready to give it some time to setup. You’ll have to wait for the fills to dry or at least setup anyway.

Is WonderBoard mold resistant?

Cement board is sometimes called Durock, Wonderboard, and Hardibacker. It is used for wet applications in tubs walls, shower walls, and floors. … Should the grout or caulk fail, the wall is waterproof, and therefore cannot rot and since there is no paper, there is no mold hazard either.

How thick is WonderBoard?

When using 7/16″ WonderBoard Lite, base should be a minimum of 5/8″ thick. The total wood subfloor including the plywood and WonderBoard Lite should be a minimum of 1″ thick.