A stub-out is the exposed portion of a pipe installed during a plumbing, electrical or gas rough-in that is ready for connection to a fixture or device.

What does stub out mean?

phrasal verb. When someone stubs out a cigarette, they put it out by pressing it against something hard. Signs across the entrances warn all visitors to stub out their cigarettes.

What is a stubbed conduit?

Conduit “stub-ups” have been traditionally accepted in the concrete construction industry as a necessary evil. … The concept is to maintain a coupling within the slab or below the grade of concrete to keep future extensions of the conduit from protruding beyond the top of concrete.

What is a stub out in construction?

Stub outs are greywater collection plumbing which dead ends at a cap. They provide for for easy diversion of graywater to a future graywater system to be made during the construction of a house, without having to install the complete graywater system.

What is the use of drain stub out?

The stub-outs are the points of use of the plumbing supply and drain pipes. So-called because they extrude from the wall at locations where new fixtures are slated to go in, plumbing stub-outs are the end result of the rough-in phase of a plumbing installation.

What is a sink stub out?

The plumbing stub-outs are the end result of the rough-in phase of plumbing a residential or commercial building. They are usually installed while the walls are still uncovered; and after the drywall work and painting is complete, a plumber comes back and hooks them up to the plumbing fixtures.

What does stub up mean?

stub up definition, stub up meaning | English dictionary 1 a short piece remaining after something has been cut, removed, etc.

How do I remove stubs?

Cut the PVC pipe at any point inside the wall that allows you to remove the stub-out, using a hacksaw. You may have to make two cuts to separate the tee holding the stub-out from the waste and vent pipes. Remove any clamps holding the stub-out with a screwdriver or hammer, and pull out the stub-out.

What is stub implementation?

A stub, in this context, means a mock implementation. That is, a simple, fake implementation that conforms to the interface and is to be used for testing.

What is a concrete stub?

Pipe stub outs are the sections of pipe that feed from the lines run underneath a slab or building, through the slab, then connect to appliances, or eventually continue on to the upper levels of your building.

Article first time published on

How far should a stub out extend through a finished wall?

The drain stub-out extends from a fitting — usually a sanitary tee — to a point 3 or 4 inches beyond the wall. If you are referring to the rough plumbing, it should be flush with the finished wall. If it has to stick out of the wall, no more 1 inch, or enough pipe to receive the the next fitting.

What is a plumbing leave out?

These are sections of the slab that are left unfilled with concrete so that plumbing penetrations may be manipulated and so that the structure may drain in the event of any future leaks. … Think about it: Leave-outs can be as large as 2′ x 2′ and scattered around the footprint of a home or structure.

What are stubs in field?

The stubs are the organic waste which will be formed naturally. The stubs can be decomposed naturally and it can be converted into organic manure. The organic manure is formed by grinding it or it can be used as fertilizer for the soil by injecting it into the soil.

What is stub up length?

The ‘Stub-up’, or 90º bend is usually the first bend that an electrician learns. A 90º bend simply consists of one 90º bend at a desired distance from one end of a length of conduit.

What is a stub soil stack?

A stub stack is a cut-off version of an SVP, which is fitted with an air admittance valve to prevent foul smells. The stub stack should still be a 100mm diameter pipe. Rules on the use of stub stacks are commonly forgotten.

What is the purpose of a function stub?

A method stub or simply stub in software development is a piece of code used to stand in for some other programming functionality. A stub may simulate the behavior of existing code (such as a procedure on a remote machine; such methods are often called mocks) or be a temporary substitute for yet-to-be-developed code.

What is the use of stub?

Stubs are used during Top-down integration testing, in order to simulate the behaviour of the lower-level modules that are not yet integrated. Stubs are the modules that act as temporary replacement for a called module and give the same output as that of the actual product.

What is the difference between mock and stub?

A Mock is just testing behaviour, making sure certain methods are called. A Stub is a testable version (per se) of a particular object.

How long should toilet stubs be?

12 inches is the most common toilet rough-in size. However, it’s useful to know that toilet’s also come in: 10-inch rough-in.

What is a slab leave out?

This is a close-up look at what we call a “leave out.” In the slab there are recessed light fixtures and these cardboard tubes are in the place where the fixtures will eventually get installed but during the concrete our, they prevent the concrete from going into those locations – hence the name “leave out.”

What do plumbers call toilets?

Lavatory. While sometimes used by the general public to mean a bathroom or washroom, the plumbing industry uses lavatory to mean a bathroom washbowl or basin permanently installed with running water. The plumbing industry uses the term “sink” in reference to kitchen sinks.

Do bathtubs need P traps?

P-traps are S-shaped pipe components that keep toxic sewer gases from escaping into your residence. They are required on all plumbing fixtures, including sinks, tubs and showers. Toilets have built-in traps.

Why stubs should be retained in the field?

Stubs are the short end remaining in the field after harvest and they should decomposed again by sprinkling soil and water on them as they have already developed the deep roots in field and consumes essential nutrients from soil and take some lesser time to cultivate than the seeds which are sowed again.