A device which establishes a connection between two or more electric conductors, or between one or more conductors and a terminal, by means of mechanical pressure and without the use of solder.

What is a solderless connector used for?

Solderless strip connectors are designed to allow you to make solderless connections to LED strip lights. They work by inserting the strip into the below connectors. The contact pads on the strip slide underneath the contact prongs on the connector, completing the electrical circuit.

Are solderless terminals quick to install?

Solderless connectors make it very easy to install LED strip lighting. While soldering provides the most stable connection for the LEDs, our solderless connectors provide a strong connection without the extra work.

Are solderless connectors reliable?

Continuous conductive path. The connection is highly reliable under most conditions including vibration. So it’s going to last, it’s going to last a long time.

Should I crimp or solder?

Crimping offers stronger, more reliable connections than soldering. Soldering uses heated metal to join the cable to the connector. Over time, this filler metal will degrade, which may cause the connection to fail. Most electricians will agree that crimping is also easier than soldering.

Who uses soldering irons?

Soldering irons are familiar to most jewelers, metal workers, roofers and electronics technicians as they frequently use solder to join pieces of metal together. Depending on the job different types of solder is used.

Does soldering a wire increase resistance?

Resistance. At a first glance, it might seem like soldering provides a lower resistance than crimping. Surprisingly, reality differs. A properly crimped connection actually creates a metal-metal colloidal bond at the surface between the wire and the terminal.

Why do you need LED light connectors?

Why would I connect LED Light Strips? The primary benefit of connecting strips is being able to light a larger area. One LED Light Strip might not be enough to make it all the way around a room, so being able to connect multiple strips together can solve your problem.

Do I need to buy connectors for LED lights?

A simple white LED light strip has two pins, so you’ll need a connector designed for two pins. … These have a dedicated white chip. While RGB LED strips can create white color, they can’t get as pure white as an RGBW strip can. RGBW strips have five pins so make sure you buy strip connectors with five pins.

What are crimp connectors?

A crimp connector is a type of solderless electrical connector used for terminating stranded wire. … The crimp fitting is then compressed (crimped) around the wire with a pair of crimping pliers. When done correctly, this connection is both mechanically sound and gas-tight.

Article first time published on

Should you tin wires before crimping?

On many industrial installations the wires will be pin-crimped before insertion. This reduces the risk of stray strands left out of the terminals. Some crimpers result in a square cross-section on the crimp and these work well with the flats grips on the terminals. You should absolutely NOT tin the wires.

Should you solder car wires?

There should be enough strain relief to keep the joint from moving at all. Of course, avoid using solder unsupported in high vibration applications. Solder is not a substitute for a good mechanical connection – Never use solder to hold the wires together. That’s a recipe for failure.

Does joining speaker wire reduce quality?

Splices degrade the sound: Audio experts have determined that properly spliced and soldered wires do not change or degrade the sound coming out of speakers. Although an oscilloscope can detect splices by identifying small voltage drops or spikes, the anomalies are too small to hear.

Do you need to solder crimp connectors?

If necessary, you could add a solder joint between the wire and connector. However, wires that are crimped properly will create a gas tight, cold joint and should not need solder. Keep in mind, that adding solder will add stress to the joint due to mechanical vibrations and thermal cycling causing joint failure.

Can a soldering iron melt metal?

A metal with a low melting point is considered soft, and a metal with a high melting point is considered hard. Soldering irons use soft metals because they don’t produce enough heat to efficiently melt harder metals.

What can you fix with a soldering iron?

  • 1) Soldering in the Roofing Business. …
  • 2) Soldering Metal Gutters. …
  • 3) Soldering Stained Glass and Mosaics. …
  • 4) Soldering for Plastic Circuit Boards. …
  • 5) Soldering for Electricians. …
  • 6) Soldering in Auto Repair. …
  • 7) Soldering Tools for Home Projects. …
  • 8) Soldering in Jewelry.

What are LED connectors?

LED light strip connectors provide easy, secure connections without soldering. 2-pin LED strip connectors are used for white or single color light strips. Connect your LED strip light ribbons to the driver, extra wire, or to other cut strips.

Does just for copper work?

5.0 out of 5 starsIt works and is easy to use. This product works for pressures within copper piping as advertised. For water normally 60psi and have seen 125psi for air. It holds very well.

How do you connect my LED lights to my phone?

  1. Step 1: Download LampUX App. Android and iOS users can go to the App store and download LampUX App on your phone, then register an account.
  2. Step 2: Set Up the Smart LED Light Strip. Turn on the LED strip lights and wait for 10 seconds. …
  3. Step 3: Connect the App.

Can you reconnect cut LED strips?

A: If the LED light strip you purchased can be cut, the remaining part that you have cut off cannot be used anymore. If you want to reconnect them after cutting, you must use an additional 4 pin connector to reconnect. … If you need to reconnect LED light strips after cutting it, you need an additional 4pin connector.

Are LED connectors universal?

Before you buy any of these connectors though, check the product page to make sure it’s compatible with your strip, as the connectors are not universal.

Can I use an extension cord for my LED lights?

LED Strip Jumpers are best used to run as extension cables from the LED power source to the LED strips themselves. They can also be used to jump in between two reels of LED strips, just make sure you aren’t exceeding the maximum run length of your strip.

How do you connect LED lights to mains UK?

To get your strip light working, connect the transformer / driver to the strip light ( extending the cable with 2 core flex if necessary). Then you connect your transformer / driver to the mains via a plug or direct to the mains and you’re away.

What do you do when LED strip lights stop working?

Check for any visible loose connections, make sure all of your connectors and wires are in place and have not fallen out. Try tightening screws on DC adapters, and re-inserting LED strips into solderless connectors, which are common contact failure points.

What adapter do you need for LED lights?

LED light strips typically operate on 12V 24V DC power. Therefore, small strip light projects often need to choose 12V or 24V power adapter.

Why are my LED connectors not working?

With the connector box open, we need to check and make sure that LED strip’s oval or circular copper pads are properly lined up with the connector’s silver pins. If you can see that they aren’t aligned right, gently move the strip back and forth until the strips light up properly, this usually fixes connection issues!