Our coping is 1.5″ thick not 1.25″ like most the competition sells, which affords you a more elegant and rich look to your pool. 2″ thick coping is also available.

How thick should coping be?

You have many choices when selecting coping. Flat 20mm coping is the most economical. Rebated in 40mm and 100m faces give a thicker more substantial look. Older pools often require non-standard sized coping pieces.

What is a standard pool coping?

Pool coping is the term used to identify the material used for the capping or edging that is placed around the swimming pool shell wall. Coping separates the swimming pool shell from the surrounding surface area and helps to protect the pool structure.

How much should pool coping stick out?

30mm overhang is standard. The mortar will squash out and some will fall into the pool. The “holes” between the pool and coping need to be filled.

How wide is typical pool coping?

The sizes vary extensively in Bluestone’s coping material with lengths ranging from 36 – 72 inch and widths from 12 – 24 inch.

How much should a coping overhang?

When selecting your coping please allow 25-35mm overhang on each side for the drip channels. Copings are supplied throated.

How do you measure pool coping?

Water-line Tile or Pool Coping: Measure the pool perimeter (distance around pool)… add all four sides. Example: 14×28 pool = 14 + 14 + 28 +28′ = 84 lineal ft. perimeter.

Does pool coping have to be bullnose?

Choosing the pool coping style depends entirely on your personal taste and the appearance that you want for your outdoor area. You can choose from square edged (cantilevered), bullnose, , and rolled-edge. The square edge is a straight finish while bullnose is a flat surface with a rounded edge.

How many inches is coping?

Each coping is 2 feet long. Large copings (medium line) are approximately 12 inches wide and small copings (trim line) are 8 inches wide.

Can you use normal tiles for pool coping?

The most popular natural stone tiles for coping is travertine. … However, a good tip is to use a travertine paver with a tumbled edge. This gives an alternative to a bull-nose finish. Travertine pavers normally come 30mm thick so they are very sturdy and suitable as pool coping tiles.

Article first time published on

How wide should coping stones be?

Plain flat coping is available in widths from 230mm up to 800mm. Our moulded flat coping comes in base widths ranging from 100mm to 560mm as standard. Flat coping comes in 600mm lengths as standard.

Does a pool need coping?

If an in-ground swimming pool is constructed of concrete, it will need coping, which is a cap for the edge of the pool. Besides simply being necessary, the coping provides an opportunity for a decorative accent, which can greatly enhance the appearance of the pool.

Can you replace pool coping?

If the coping is in good shape but appearance wise the aluminum is scratched or the paint or coating is coming off, you can repaint it with a coping paint and make old coping look brand new. I would not suggest changing pool coping if you do not really need to, as it is a big project.

What is the most popular pool coping?

Concrete is probably among the most frequently used materials for pool coping. The reason for this is because it’s easy to work with, and it’s usually a more affordable option in comparison to some other materials.

How thick is travertine pool coping?

Travertine pool coping and travertine pavers are both 1.25 inches thick, making them complementary building materials. Travertine pavers and pool coping also share the same lightly tumbled finish, which ensures they’ll blend well in any project where they’re used together.

How big is an 80 foot perimeter pool?

Pools are measure by perimeter and surface area. For example: A small pool would be 15′ x 25′ would have a perimeter of 80 ft, a surface area of 375 sq ft and approximately 8,000 gallons based on 3’x4’x5′ depth.

How many square feet is a 15 ft round pool?

Measure the width. Multiply the length by the width of the pool to find the square footage. For instance, 15 feet (length) times 12 feet (width) equals 180 square feet.

How far does pool coping overhang?

1.5″ is standard overhang for most pools with this style of coping. As much as 3″ is used for pools that are not built to square (to hide the lines) or pools that have an automatic pool cover with rails mounted on the underside of your coping.

What is cantilever pool coping?

What is cantilever pool coping? Cantilevered pool coping is a concrete edge around the perimeter of your pool. It is cantilevered, which means it extends several inches in from the edge of your pool. Its job is to create a sort of lip or overhang along the pool’s edge.

How much does it cost to redo pool coping?

The cost to replace pool coping is $2,000 to $3,000. The pool coping is the finished edge at the top of your inground pool. In the case of a vinyl pool, the coping holds the vinyl liner. In concrete and fiberglass pools, the coping is the beginning of the pool deck.

Do coping stones need a drip channel?

These copings are supplied with a drip channel placed under both sides to ensure rain water will not run down the face of your wall. Coping must overhang the wall by a minimum of 30mm each side in order for the drip channel to function properly.

What is twice weathered coping?

Double pitch (or twice weathered) coping is designed with a double slope to allow water run off in two directions, or both sides of the wall. … On smaller copings that do not have drip groves, these can be added by special request. Manufactured from high strength concrete with a smooth finish.

Is Sandstone good for pool coping?

Sandstone. A sedimentary rock composed of sand-size grains of mineral, rock, or organic material. Many sandstone materials are great for pool decks as their split surfaces are naturally slip-resistant.

How thick should pool tiles be?

“However, the most common sizes used for fully tiling pools are 20mm to 58mm.” Amanda says the most popular colours for swimming pools are blue tiles.

Can you use porcelain tiles for pool coping?

Porcelain outdoor pavers are a preferred pool deck material because of their slip resistance feature. Even when exposed to water, porcelain tiles won’t become slippery or especially dangerous to walk on.

Are coping stones necessary?

Coping stones are massively important when it comes to your walling project. They protect walls from weather damage and come complete with drip checks – which helps to keep water away from the wall. Coping stones are manufactured from high-strength concrete and provide an aesthetically-pleasing finish.

What is parapet coping?

Offering a complete finish to any parapet wall, Canted Coping is the best solution for a parapet wall condition where a slope must be built. This helps ensure that water drips back towards the roof and not down the front of the building. This system uses a continuous cleat for high wind up-lift resistance.