The SM57 is one of those dynamic mics that needs a good amount of amplification so an external inline or outboard preamp is recommended, especially if the preamps in your audio interface, mixer or field recorder aren’t the strongest.

What do I need for Shure SM57?

Requirements for the Shure SM57 Whether you’re recording in a studio or on stage, you’ll need a mic stand. An XLR cable is also required. Those using a guitar amplifier need an XLR cable that terminates in a ¼” plug.

Does the Shure SM58 require phantom power?

No, the Shure SM58 microphone does not require phantom power simply because it does not have any active circuitry within it. This article will explain what phantom power is and why the SM58 does not need it, whether or not phantom power can harm a dynamic microphone, and what the Shure SM58 microphone is.

Do I need phantom power for mic?

Put simply, condenser microphones have active electronics that need an external power source, while dynamic mics are passive and therefore do not need phantom power. Because of the way condenser mics work, their output is very high impedance, and therefore requires a powered circuit to reduce that impedance. 3.

Why is my SM57 so quiet?

The reason your SM57 is quiet is because it is not a high output microphone (sensitivity is about -57dB) and you do not have an adequate preamp in your system.

Will phantom power damage an SM57?

The SM57 is a dynamic microphone. A professional, balanced, dynamic microphone will not be damaged by phantom power. It will “ignore” it.

Is a Shure SM57 good for vocals?

Is the Shure SM57 good for vocals? Yes. As covered above, it can work very well on loud singers. But if you’re looking for a vocal mic, you may want to look at a condenser microphone first.

What is a Shure SM57 good for?

It has an extremely effective cardioid pickup pattern which isolates the main sound source while minimizing background noise. In the studio, it is excellent for recording drums, guitar, and woodwinds. For musical instruments or vocals, the SM57 is a consistent choice of professional performers.

Are SM57 good for Toms?

Shure SM57 Not a bad choice if you need your toms to cut and “bark.” If the drum you are miking lacks sustain, you may want to try a different mic that emphasizes sustain a little more.

How do I know if I need phantom power?

How do I know if my mic needs phantom power? Well, the simplest way would be to verify whether your microphone is a condenser type or another type such as dynamic or ribbon. If it is a condenser microphone it will need phantom power, if it is a different type of microphone it will not.

Article first time published on

What needs phantom power?

Phantom Power is a term given to the process of delivering DC (Direct Current) to microphones requiring electric power to drive active circuitry. … Condenser microphones such as Shure’s KSM range all have active circuitry and require phantom power.

Should I buy phantom power?

Do I need phantom power for my guitar? Phantom power is not required for your guitar. However, some active guitar DI boxes will need it. Refer to the DI box Owners Manual for specific power requirements, however.

Is SM57 a condenser mic?

Dynamic microphones like the Shure SM57 and Shure SM58 are legendary for not only their good sound quality, but also for the amount of abuse they can withstand. … Dynamic microphones don’t require their own power supply like condenser microphones.

What type of mic is an SM57?

In this article. Shure SM57 Cardioid Dynamic Instrument Microphone Dynamic Microphone with Cardioid Pickup Pattern, 40Hz-15kHz Frequency Response, Low Impedance, Includes Stand Adapter, and Zippered Carrying Case When you buy a Shure SM57, you’ve got a great dynamic microphone for life.

Does AT2020 need phantom power?

Description The AT2020 is a side-address fixed-charge condenser microphone with a cardioid polar pattern. It is designed for project/home studio applications. The microphone requires 48V phantom power for operation. … Operation and Maintenance The AT2020 requires 48V phantom power for operation.

Does the Cloudlifter need phantom power?

The Cloudlifter requires phantom power in order to operate, so make sure you’re sending phantom power (+48V) to it. Don’t worry, it doesn’t pass the phantom power to the microphone, so your dynamic or ribbon microphone will not be harmed.

What mic did Michael Jackson use?

Quincy Jones and recording engineer Bruce Swedien used an SM7 for most of Michael’s vocals and, according to legend, all of Vincent Price’s. It was a brave choice.

Is an SM57 The same as an SM58?

The SM58 was designed for vocal applications, and therefore uses a ball grille with built in pop filter to eliminate plosives. … The SM57 is designed as an instrument microphone, where a smaller grille size is more practical and plosives are less of a concern.

What polar pattern does a Shure SM57 have?

With a uniform cardioid pattern and a pneumatic shock mount system, you get a whole lot of tone without the handling or background noise.

Does Sennheiser e609 need phantom power?

Power: 48V/2.2mA phantom power required.

Does the Shure SM57 use a battery?

Batteries are not needed. Do you find this helpful? No. You to plug a XLR cable and it will power the mic.

Does phantom power hurt dynamic mics?

A balanced dynamic microphone is not affected by phantom power; however, an unbalanced dynamic microphone will be affected. Although the microphone will probably not be damaged, it will not work properly.

What is a good Tom mic?

  • AKG C414 XLII Large-diaphragm Condenser Microphone. If you need a high-quality microphone, look no further than the AKG C414 XLII. …
  • Shure KSM32 Large-diaphragm Condenser.
  • Audio-Technica AT4033/CL Large-diaphragm.
  • Beyerdynamic M 201 TG Hypercardioid Dynamic.
  • Sennheiser e 604 Cardioid Dynamic.

Should I MIC Toms?

MIKING TOMS: Similar to other drums, the toms need to sound great on their own acoustically before microphones are placed. This will result in a better sound. … Miking a tom with one microphone is preferable as it has more clarity than miking with two mics, having one on the bottom.

What mic does toms use?

  • AKG C414 EB. …
  • AKG D 19. …
  • Audio-Technica ATM25. …
  • Audio-Technica AT4033/CL. …
  • Beyerdynamic M201TG. …
  • CAD Audio M179. …
  • Neumann U 67. …
  • Sennheiser MD 421-II.

Is the SM57 good for guitar?

The Shure SM57 is a very capable microphone for recording an acoustic guitar. Its ability to eliminate unwanted noise make it a good choice to capture the acoustic guitar’s clarity and detail. Condenser microphones are the best option for acoustic guitar, but with care an SM57 can work well.

Why is the SM57 good for guitar?

The SM57 is especially useful for recording electric guitars. Its contoured frequency response means it’s able to impeccably reproduce instrumental sounds. This mic is also built to amplify sounds, drawing attention to every intricate detail of the music you’re making.

Is SM57 good for brass?

The SM57 is definitely one of my first choices when recording most brass instruments, and I’m certain many other’s feel the same way. Point the microphone capsule towards the loud end of the trumpet and hit record. You can adjust distance based on how much proximity affect you want on the recording.

Does Rode NT1 need phantom power?

Yes phantom power is required for any condenser microphone, including the Rode nt1a, the Rode nt1 and the Audio Technica AT2020, in order for them to function correctly.

Is Shure SM57 balanced or unbalanced?

If a microphone has an XLR output connector, it outputs balanced audio. For example, the Shure SM57 dynamic and Rode NT1-A condenser microphones (pictured below) output balanced audio via XLR.

Can phantom power damage instruments?

In some cases, phantom power can damage equipment. Although dynamic microphones are unlikely to be damaged, sending phantom power to a ribbon microphone can cause permanent damage. … Various microphones, outboard equipment, speakers, instruments, and cables all form a studio setup.